Sherman Oaks Windows & Doors From the Footing Up
Sherman Oaks wider openings start at the old door: we check the existing header, the crawlspace or slab and the footings before a beam or door is quoted.
Before any price, we pull the casing off the existing back door at a Sherman Oaks house and look at the header already in the wall. Its size and the king studs beside it show how the load was carried when the house was framed. Then we check what is under the floor, a crawlspace or a slab, because the new posts need somewhere solid to land. Those 2 looks shape the wider opening to the deck.
Under the floor and over the door
On a raised floor, the crawlspace shows the footing along the wall and whether it can take a concentrated post load. A new pad footing may be needed under each post, dug and poured from below. On a slab, we look for cracks near the wall and ask the engineer whether a section must be cut out for a new footing. Above the door, the existing header tells us whether the wall was framed to carry weight at all. The engineer works from those notes, and anything they add, such as a footing, is priced on its own line.
Sherman Oaks and LADBS
As part of the City of Los Angeles, Sherman Oaks is permitted through LADBS. A widened bearing wall needs a structural plan showing the beam, the posts, the footings and the hold-downs, plus the energy compliance form for the new glazing. If new pads are poured, the inspector looks at the footing excavations before any concrete goes in, then at the framing, then at final. Encino, Van Nuys, Valley Glen and Studio City sit inside the same city and follow the same LADBS process from plan check to sign-off.
Windows & Doors in Sherman Oaks: what people ask
Once we know where the posts can land, quite wide. The beam size follows the load above, and the footing below each post follows the soil and the existing foundation. If the ceiling is low, a long span may need a steel beam to stay hidden above it.
Check the floor before picking. A folding unit needs a dead level sill line across the whole span, a pocket unit needs a long solid wall section beside the opening, and a slider forgives a little more. Our quote prices the systems that suit what we found at the wall.
A beam sized for the measured load, posts under each end, and footings under the posts when the existing ones fall short. Temporary walls hold the ceiling while the studs come out. LADBS inspects the footings, then the frame, before anything is covered.
Windows & Doors in other cities
More of what we build in Sherman Oaks
Start your project in Sherman Oaks
Send the form with the size of the space and what you want to change.