Valley Glen Windows & Doors, Measured Beside the Opening

Folding, sliding and pocketing glass doors and wider openings for Valley Glen homes, planned from the free wall space beside the opening.

Tell us about the opening, deck or room

We read every request and reply to set up a measure. Photos of the wall or yard help, and we ask for them by email. How we use your details.

To send, add your first name and a phone number or an email.

The first tape pull at a Valley Glen back wall goes along the floor beside the opening, because folding panels need somewhere to park when the room is open. Furniture, a corner cabinet or a return wall can shorten the stack, and that tells us how wide the glass can be before an engineer draws a single line.

Where the panels come to rest

Folding leaves gather in a bundle at one side, and the bundle has a thickness of its own. Sliding panels ride past a fixed one, and pocketing panels need a hollow in the wall about as wide as the door. Each leaves a different amount of view when open, so the room beside the opening sets the options before taste does. We note the clear space on a sketch, add the height, and mark anything that would block a panel in motion.

Then the beam and the floor

With the stack space known, the structural questions follow. An engineer sizes the header for the span you want, and the posts at either end must land on solid support. The threshold comes next: a low sill with a drain channel lets the floor run out toward the yard. Glass is picked for the direction the wall faces, with a low-e coating and tempered panes where the code asks for them. Windows beside the door can be swapped in the same visit.

About windows & doorsEverything we build in Valley Glen

Windows & Doors in Valley Glen: what people ask

More of what we build in Valley Glen

Start your project in Valley Glen

Send the form with the size of the space and what you want to change.