Decks & Patios in Sherman Oaks

Sherman Oaks patio covers planned from the roof edge down, with eave, overhang and wires checked first and the connection to the house detailed for LADBS.

Tell us about the opening, deck or room

We read every request and reply to set up a measure. Photos of the wall or yard help, and we ask for them by email. How we use your details.

To send, add your first name and a phone number or an email.

Looking up comes first at a Sherman Oaks visit: the eave line, the roof overhang and any wires overhead decide how tall and how close a patio cover can be. Only after that do the posts, the beam and the shade pattern get discussed, since a cover has to meet the house where the roof allows, and the ground plan follows from there.

Reading the roof edge

The cover can tie into the wall below the eave or into the roof framing itself, and each choice changes flashing and height. A low eave forces a shallow slope, and gutters may need to be reworked so water from both roofs leaves safely. Skylights, vents and electrical service lines near the edge are noted on a sketch. If the sums do not work, a freestanding cover with its own posts on every side is the fallback, drawn with its own beam and footings so nothing leans on a weak eave.

Posts, footings and review

Because Sherman Oaks falls within the City of Los Angeles, LADBS reviews a cover as a small structure. Posts sit on footings sized for the span and the roof weight, and the connections to the house are drawn out. Open footing holes are inspected before concrete is placed. Lights and fans are wired before the roof closes over the ceiling, which hides the cables inside the finished structure. Fan boxes get their own bracing, because a spinning fan needs more support than a light fixture does.

About decks & patiosEverything we build in Sherman Oaks

Decks & Patios in Sherman Oaks: what people ask

Start your project in Sherman Oaks

Send the form with the size of the space and what you want to change.