Decks & Patios in San Pedro

Decks, patio covers and wider back doors in San Pedro, built door first so the new sill sets the deck height, with stainless hardware throughout.

Tell us about the opening, deck or room

We read every request and reply to set up a measure. Photos of the wall or yard help, and we ask for them by email. How we use your details.

To send, add your first name and a phone number or an email.

Replacing the back door, or widening it into a slider, belongs at the front of a San Pedro deck project, because the new sill height sets where the deck surface lands. With the opening framed and flashed, footing holes go in and get inspected, then the ledger, joists and boards. Rails and the cover come last. Near the ocean, damp and salt call for stainless hardware at every step of that order.

Door first, deck second

A wider opening needs a header sized for the span, and that structural work happens from inside and outside at once. Building the deck ahead of it would leave no room for ladders and put new boards in the way of falling debris. Once the door is set, its sill becomes the reference: the deck surface sits a short step below and slopes away. When the header and the deck go together, LADBS can review them on one set, which keeps the inspections in a sensible order and the paperwork in one place.

Closing it in

With framing inspected, decking goes down with hidden clips or stainless screws. Guards follow, with posts blocked to resist a hard push at the top rail. If the cover carries lights or a fan, wiring runs through its beams before the roof panels go on, and the electrical inspector sees it open. The ledger flashing gets a last look at the same time. Final inspection covers the door, the deck and the cover together. Cleanup and a walk-through finish the job, so each detail can be seen before the furniture moves out.

About decks & patiosEverything we build in San Pedro

Decks & Patios in San Pedro: what people ask

More of what we build in San Pedro

Start your project in San Pedro

Send the form with the size of the space and what you want to change.