Decks & Patios in Glendale

Glendale decks planned from measurements at the back door, with height, drainage and stair length worked out before drawings are filed with the city.

Tell us about the opening, deck or room

We read every request and reply to set up a measure. Photos of the wall or yard help, and we ask for them by email. How we use your details.

To send, add your first name and a phone number or an email.

How close to the back door can a deck sit without a step down? That question starts the site visit, and the answer comes from measuring the door sill, the ground at the wall and the depth of whatever is there now. With those figures in hand, a Glendale deck can be planned to meet the floor inside, or to stop a deliberate step below it.

Reading the door and the ground

A French door and a slider have different sills, and both need a gap where water can drain at the threshold. The measurement runs from the finished interior floor down to soil at the wall, then to the top of any slab. If the drop is small, the deck sits just under the sill with a slight fall away from the house. If it is large, the frame grows taller and the stair, guard and bracing grow with it, which the written quote lays out line by line.

What the height changes

A flush deck needs flashing tucked behind the siding and above the ledger, so the wall covering is opened along that line. A deck a step down keeps the door detail simpler and can hold a drain strip along the threshold. Either height shifts the footing depths and the length of the stair, so the choice is made with the numbers on the table, before the plans are drawn and filed with the city building department. A note on the sketch records which choice was made and why.

About decks & patiosEverything we build in Glendale

Decks & Patios in Glendale: what people ask

More of what we build in Glendale

Start your project in Glendale

Send the form with the size of the space and what you want to change.