Can a Mission Hills deck sit level with the floor inside?

Often, yes. Whether it works comes down to sill height and how rain behaves at the door. A deck can be framed to land at the floor line, and a slab can be poured to match. At the measure we tell you which detail suits the doorway.

Which patio cover gives the most usable shade in Mission Hills?

Begin with the hours you sit out there and the side that catches the late sun. Solid roofs make full shade, tilting louvers follow the light, and slatted pergolas drop a soft pattern on the table. Wiring for lights or a fan goes in before the roof closes.

Is a permit needed for a deck or pergola in Mission Hills?

Mission Hills falls under the City of Los Angeles, so LADBS issues the permit for a house-attached roof or a raised deck. We look up the lot, draw the sheets, submit them and call for inspections at footing, framing and final.

Decks & Patios in Mission Hills

Decks, patios and covers in Mission Hills, built in order from buried conduit and drains to inspected framing and the finished surface and shade.

Ask for a callback

Everything that has to be buried goes in before anything is built over it. For a Mission Hills patio or deck, that means conduit for lights, a gas line for a fire feature, an irrigation re-route and the drain, all placed while the ground is still open. The surface and the cover come afterward, on top of work that has been checked.

Underground first

Trenches are opened before footings are dug. Conduit for lights, outlets and a fan is laid at its proper depth, a gas stub is run if there is a fire feature or a grill, and the drain line is set with its fall. Irrigation lines near the footprint are rerouted or capped. Everything gets photographed and noted on the plans before it is covered, so the next owner or electrician knows where it runs. Backfill and compaction follow, and only then does the slab base or the footing layout begin.

What the city inspects, and when

Mission Hills falls under the City of Los Angeles, which means LADBS does the reviewing and inspecting. Inspectors visit at set points: open footing holes before concrete, framing before the surface covers it, and the finished structure at the end. Because the buried work was done first, each visit finds the layers in the order the plans promised. If a change is needed along the way, revised sheets are filed before the next layer goes on, and the crew builds only from the sheets on file.

About decks & patios Everything we build in Mission Hills