Decks & Patios in Canoga Park

Decks, patio covers and pergolas in Canoga Park drawn with the connections a plan reviewer reads first: ledger, posts, footings and guards.

Tell us about the opening, deck or room

We read every request and reply to set up a measure. Photos of the wall or yard help, and we ask for them by email. How we use your details.

To send, add your first name and a phone number or an email.

Connections get read first when a Canoga Park deck set lands on a reviewer's desk: how the ledger fastens to the house, how each post ties to its footing, and what holds the guard to the frame. Drawings that show those points clearly move through plan check with fewer questions, and they give the crew the same instructions the inspector will use in the field.

Ledger, posts and footings

Attachment to the house gets the most scrutiny, so the drawings show the ledger board, its flashing and the bolts or structural screws holding it to the framing, with spacing called out. Each post gets a connector at the top and a base that ties to its footing, and the footing size is stated against the soil and the load. Beams and joists show spans and hangers, so a reviewer can see that the load has a continuous path to the ground.

Guards, stairs and covers

Guards are checked next: height, post attachment and the openings between balusters. Stairs get rise and run dimensions, plus a handrail once they climb past a set number of steps. For patio covers, the sheet shows rafter size, post size and how wind lift is resisted, plus roof loads. Electrical for lights or fans is noted, so the inspector finds the circuits where the plans say. Anchors at each post base are named on the sheet, so the inspector can check the hardware against the drawing.

About decks & patiosEverything we build in Canoga Park

Decks & Patios in Canoga Park: what people ask

More of what we build in Canoga Park

Start your project in Canoga Park

Send the form with the size of the space and what you want to change.